THERM-A-GAP 8010 Gel 30 cc Cartridge

CX6500GEL8010 0030

SKU: CX6500GEL8010 0030 Categories: ,


THERM-A-GAP 8010 is a low thermal imedance, high bulk thermal conductivity, high performance, fully cured dispensable Gel

Therm-A-Gap Technical Data Sheet

Value Proposition

Parker Chomerics fully cured dispensable GELs eliminate time consuming hand assembly, decreasing installation costs and reducing customer manufacturing and purchasing (logistical) complexity. These products require no mixing or curing, providing superior design flexibility.
  • Provides low thermal impedance at thin and thick gaps, allowing use of common heat spreaders
  • Proven reliability in extreme temperature cycling and shock & vibration
  • Deflects easily under very low compressive forces, decreasing stress on components thus decreasing component failures.


Typical Properties Product Test Method
Physical Color Select product from right column to view specs here Visual
Flow Rate, grams/min - 30cc syringe with no tip attachment 0.100” orifice, 90psi (621 kPa) Chomerics
Specific Gravity ASTM D792
Percent Deflection @ Various Force Levels Modified ASTM C165 Dispensed 1.0 cc of material Brought 1” x 1” probe down to 0.100” Test rate 0.025 in/min
Typical minimum bondline thickness, in (mm) Chomerics
Thermal Thermal Conductivity, W/m-K (needs elaboration) ASTM D5470
Heat Capacity, J/g-K ASTM E1269
Coefficient of Thermal Expansion, ppm/K ASTM E831
Operating Temperature Range, °F (°C) --
Electrical Dielectric Strength, VAC / mil (KVAC/mm) ASTM D149
Volume Resistivity, ohm-cm ASTM D257
Dielectric Constant @100 kHz ASTM D150
Dissipation Factor @ 100 kHz Chomerics
Regulatory Flammability Rating UL 94
RoHS Compliant Chomerics Certification
Outgassing, % TML (CVCM) ASTM E595
Shelf Life, months from date of manufacture Chomerics

Features and Benefits

  • Easily dispensable
  • Fully-cured / No pump out
  • High bulk thermal conductivity
  • Low thermal impedance
  • Ultra low compression force
  • High tack surface & reworkable
  • Proven long-term reliability

Typical Applications

  • Automotive Electronic Control Units (ECUs)
  • Power Supplies & Semiconductors
  • Memory & Power Modules
  • Microprocessors / Graphics Processors
  • Flat Panel Displays & Consumer Electronics

Product Attributes

GEL 8010

  • Thin bondline gel (approximately 2-10 mils)
  • Low thermal impedance gel
  • Stencil printable with no pump out
  • Ideal for high-volume dispensing
  • Proven long-term reliability

GEL 30/GEL 30G

  • Accommodates a variety of bond line thicknesses for application to multiple devices
  • GEL 30/GEL 30G has been successfully used to fill a variety of different gap thicknesses. Please reference the GEL 30/GEL 30G Reliability test report for additional details and surface recommendations.
  • High Bulk Thermal Conductivity
  • Excellent performance-to-price
  • Compatible with high volume, automated dispense processes
  • Meets Telcordia (Bellcore) silicone specifications
  • “G” version has 0.010” glass beads as compression stops for electrical isolation

Installation Guidelines

Thermal gels are supplied in plastic syringes and aluminum cartridges. Apply pressure to the rear of the cartridge, simply dispense the desired amount onto components or cooling plates. The gel is reworkable and excess material can be easily wiped off. Since GEL 8010 gel is conformable, the gel can be stencil printed onto the plates. The thickness of the printed gel can be adjusted depending on the component type and size, but about 6mil thickness is recommended.

Ordering Information

5 = Standard Packaging 00 THERM-A-GAP GEL 8010, GEL 30 & GEL30G GEL 30/GEL 30G
0300 = 300cc Aluminum Cartridge (Caulking Style)
9 = Custom Configuration 11 33579 GEL 8010 = 1 Gallon Pail (2800cc, 7.6Kg)*
28020 GEL 30 = 1 Gallon Pail (2800cc, 9Kg)*
Custom Part Number THERM-A-GAP GEL Material Code GEL 8010 & GEL 30