18300 Sutter Blvd Morgan Hill CA 95037
PRODUCTS
THAT PERFORM
SERVICES
THAT DELIVER
KNOWLEDGE
THAT SERVES
Who Is K.R. Anderson, Inc.?
K. R. Anderson supports customer requirements for bulk and converted manufacturing materials all over the world.
CORE VALUES
- Superior customer service
- Fast turns of prototype and
production parts
- World class quality standards
- Application and production
expertise
We partner with the best manufacturers in the engineered materials industry and focus on high value products used in critical customer design and production applications. KR Anderson can precisely fabricate based on customer requirements and provide quick turn prototypes through high volume production parts.
HISTORY
K. R. Anderson, Inc. was established in 1968 as a sales and distribution organization supporting high tech markets in the Silicon Valley. In 1987, K.R. Anderson added custom fabrication to its list of offerings. With the addition of Form-In-Place (FIP) gasketing lines in 1997 K. R. Anderson became the 1st company west of Mississippi to offer turn-key FIP EMI gasketing solutions. K. R. Anderson and Rocky Mountain based sister company, Krayden, merged into one company in 2013 under the Krayden name. Product lines common to both companies were now supported by Krayden while K.R. Anderson was spun off as an independent distribution and conversion company for its exclusive lines using the trade name KraFAB
Markets Served
AEROSPACE & AVIATION
Rotary and Fixed Wing Airframes, In Cabin Equipment, Space Vehicles, Satellites, Flight Deck Installations and Assemblies.
AEROSPACE & AVIATION
Rotary and Fixed Wing Airframes, In Cabin Equipment, Space Vehicles, Satellites, Flight Deck Installations and Assemblies.
INDUSTRIAL
Plant Floor and Production Line Automation and Control Systems, Consumable items, Test and Measurement Equipment
LIFE SCIENCES
Medical devices, diagnostic & lab equipment, Ophthalmic and Optometric Equipment
ENERGY
Solar, Wind, Geothermal, Fuel Cell, and Fossil Fuel Energy Production
MILITARY
Soldier Worn, Air and Ground Vehicles, Weapons, Command and Control, Surveillance & Security
TELECOMMUNICATIONS
AND IT
Infrastructure, Last Mile, Base Stations, Access Points, Portable Equipment, Telecom Test and Measurement Equipment
SEMICONDUCTOR
Production and Inspection Equipment, Board and Housing level EMC and Thermal Management Materials
LIGHTING
Fixed, Portable and Mobile LED
TRANSPORTATION
Auto, EV, AV, Rail, Truck and Marine
KRA Preferred Suppliers
FABRICATION CAPABILITIES
K.R. Anderson has over 30 years of experience converting bulk form materials into
finished parts.
With our equipment and know-how, we are ready to handle any project from rapid prototyping to high volume production.
Our sales and engineering team members average 12 years of manufacturing materials specification and fabrication experience giving them the ability to help you select the best material for your application and to help you complete a part design with maximum performance and quality at the lowest possible cost.
FORM-IN-PLACE
GASKETING
- Turnkey Gasketed Assemblies
- Great for Complex Patterns
- Low Cost Set Up
- RTV & Heat Cure Silicones
- Conductive Filled (EMI)
- Unfilled (Environmental)
SLITTING
- Tapes, Foils & Films
- Custom Laminates
- Custom Sizes
SPLICING
- Custom Length and Shape
- Low-Cost Tooling vs Molded
- Splice is as strong as cord
stock - Allows O-ring profiles that
would be very difficult to
produce via molding
process including hollow
profiles
SHEETING &
LAMINATING
- Hybrid Multi-Layer Constructions of Adhesives, Heat Spreaders, Insulators, TIMs, Dielectrics, Conductors and/or Surface Protection Films
KITTING
- Low Contamination
- Kit Assembly
- Field Service Kits
- Consumer/MRO Kits
- Special Packaging
DIE CUTTING
- Steel Rule Die (SRD)
Quick Turn
Tolerances typically
+/- .010”
HARD TOOLING
- D2 Heat Treated Steel
- Die Tolerances at +/- .005”
- Intricate Shapes and Hard Materials
- Up to 500k Cycles Without Maintenance
ROTARY DIE
CUTTING
- Kiss Cutting Rewind
- Standard or Custom Parts
- Pick and Stick Rolls
- Zoned Adhesive
- Pull Tabs
- Multilayer Hybrid Materials
- High Volume Production
DIE-LESS
CUTTING
- No Tooling required
- Tight Tolerances
- Ability to Cut a Wide Variety of Materials
- Fast Turns
Common K.R. Anderson
Materials
K.R. Anderson Value Added Capabilities
VALUE PROTOTYPING AND DESIGN FOR MANUFACTURING:
Material and construction guidance for the best installed cost and/or cost of ownership for parts and assemblies.
INVENTORY MANAGEMENT:
Kanban, Vendor Managed Inventory (VMI), consignment and other stocking programs
PACKAGING, LABELING AND KITTING:
2/3D bar-coding, customized packaging solutions, right-sizing of curable materials (compounds, paints and coatings), kitting, part marking, subassemblies
K.R. ANDERSON QUALITY AND SECURITY ASSURANCE PROGRAMS
K.R. Anderson is very proud of its Quality Assurance Programs.
Customers list K.R. Anderson at the top of their AVL for materials and converted parts specifically because of our quality record. With our regular and comprehensive training programs for all employees on process, inspection, and documentation; our quality incentive programs; and our mature process standardization and documentation, we are able to consistently maintain a 98% rating with customers and a 95% internal quality rating.
K.R. Anderson is NIST 800-171 certified compliant supporting U.S. Department of Defense and government programs. K.R. Anderson is currently updating its security systems to meet the new CMMC security standard.
(408) 825-1900 • quotes@krafab.com • www.krafab.com